The ePTO Rear Loader

ePTO Rear Loader

This refuse truck features a fully self-contained system designed for consistent body performance, regardless of chassis brand. A low-noise hydraulic pump and motor enhance cabin comfort while meeting zero emissions requirements—ideal for environmentally conscious fleets. Built on a scalable high-flow manufacturing line, the truck benefits from repeatable build quality and simplified maintenance, thanks to standardized component placement and common controls across McNeilus platforms. With dedicated cooling and hydraulic systems engineered specifically for waste collection, this American-made unit delivers reliable, efficient performance with easy integration and service support.

Performance Specs

Dump Cycle: 16 sec
Sweep Extend: 4 sec
Sweep Retract: 2 sec
Slide Extend: 3 sec
Slide Retract: 7 sec
Tailgate Open: 30 sec
Tailgate Closed: 18 sec
Compaction: 900 lb/yd³
Ejector Extend: 20 sec
Ejector Retract: 28 sec

Body Specs

Body Floor: 3/16 in. AR200
Side Walls, Front Section: 10-gauge AR200
Side Walls, Rear Section: 1/8 in. AR450
Roof: 10-gauge AR200

Hopper Specs

Hopper Capacity: 3 cu yd
Hopper Floor: 3/16 in. AR200 (std), 1/4 in. AR200 (opt)

Packer / Ejector

Slide Face Plate: 3/16 in. Grade 50 High-Strength Steel
Sweep Face Plate: 1/4 in. AR200
Packer Edge Strip: 1/4 in. Grade 50 High-Strength Steel

Tailgate / Hydraulics

Tailgate Walls: 3/16 in. AR200
Wear Strips: 1/2 in. × 3 in. 1044 Steel
Tailgate Seal Height: 50 in.
Pump: Parker Helicoidal Low Noise Gear
Control Valves: Parker VA35 with SmartPak®
Oil Reservoir: 40 gal
Filter: Schroeder K9 – 40 Mesh Suction Strainer

Electrical / Cylinders

Electrical System: 600V Nominal
Motor: GVM PM High Efficiency Electric
Inverter: Single Electrical Inverter
Ejector Cylinder: 7-1/2 in. bore × 7 in. rod × 119-1/2 in. stroke (25 yd, 4-stage)
Slide & Sweep Cylinders: Excalibre™ or Standard Chrome
Tailgate Cylinder: 2-7/8 in. bore × 2-1/2 in. rod × 32-1/2 in. stroke

Operations & Finish

Controls: Mechanical with Integrated Panel
Telematics: ClearSky™ by McNeilus
Paint Process: Shot blasted + epoxy primer
Finish: PPG high-performance acrylic urethane topcoat

Popular Options

Spool Winch or Reeving Cylinder
Guides and Latches
Container Lift Bar

Key Features of ePTO Rear Loader

Self-contained system that is optimized and dedicated to powering body functions and consistent performance.
Low-noise hydraulic pump and motor offer quiet operations and a great cabin experience.
Meets zero emissions requirements, making it great for your fleet and great for the environment.
Designed for scalable production through our world-class high flow manufacturing line.
High flow manufacturing allows repeatable build processes to help ensure production and quality.
Consistent location of high-voltage disconnect and other components offers simplified troubleshooting, maintenance, and service training.
Common controls and interface promote operational efficiency across all McNeilus products and power types.
Consistent body performance no matter the chassis brand.

Description	25 YD³ (19.1 m³)
(A) Overall Length, Tailgate Closed	278 in. 7061 mm
(B) Overall Length, Tailgate Raised	294 in. 7468 mm
(C) Overall Height, Tailgate Closed**	99 in. / 2515 mm
(D) Overall Height, Tailgate Raised**	150 in. / 3810 mm
(E) Inside Hopper Width	80 in. / 2032 mm
(F) Hopper Opening Height	57 in. / 1448 mm
(G) Overall Width w/ Steps	102 in. / 2591 mm
Overall Width w/o Steps	96 in. / 2438 mm

EPTO Pod Description	25 YD³ (19.1 m³)
(A) Frame to Bottom of Pod	64 in. / 1626 mm
(B) Pod Height	30 in. / 762 mm
(C) Pod Depth (Body Front to Pod Front)	38 in. / 965 mm
(D) Pod Width	91 in. / 2311 mm