THE STANDARD REAR LOADER

STANDARD REAR LOADERS

Are you in search of a refuse vehicle that sets the standard for excellence? Look no further than the McNeilus Standard Rear Loader, recognized as the top workhorse in the industry. Experience reliable performance and versatility with one of the most adaptable rear loading refuse trucks available.

Equipped with features like a container tipper kick bar for efficient commercial pickups and cart tippers for streamlined residential routes, this truck is designed to simplify your collection process. The innovative rear loader design also minimizes maintenance needs compared to competitors, featuring fewer lubrication points on the tailgate and self-lubricating slide shoes for enhanced durability.

The McNeilus Standard Rear Loader is your ultimate solution for refuse collection, consistently recognized as the most requested, productive, and dependable rear loader for both residential and light commercial routes.

Performance

  • Dump Cycle: 16 sec
  • Sweep Extend/Retract: 4 / 2 sec
  • Slide Extend/Retract: 3 / 7 sec
  • Tailgate Open/Close: 30 / 18 sec
  • Compaction Force: 900 lb/yd³
  • UHMW Polyethylene Slide Shoes (Quick Change)
  • Ejector Times (17–32 YD³): 10–33 sec extend, 11–40 sec retract

Body & Hopper

  • Body Floor: 3/16″ AR200
  • Front Side Walls: 10 ga AR200
  • Rear Side Walls: 1/8″ AR450
  • Roof: 10 ga AR200
  • Hopper Capacity: 3 yd³
  • Hopper Floor: 3/16″ AR200 (std), 1/4″ AR200 (opt)

Packer & Ejector

  • Slide Face Plate: 3/16″ Grade 50 Steel
  • Sweep Face Plate: 1/4″ AR200
  • Packer Edge Strip: 1/4″ Grade 50 Steel

Hydraulics

  • Pump: Single gear/vane, pack-on-the-go control
  • Valves: Parker VA35 with Smart-Pak®
  • Reservoir: 40 gal (17–20 yd³), 50 gal (25–32 yd³)
  • Filter: Parker 40 CN, 100 mesh suction strainer

Cylinders

  • Ejector: 6¼” bore x 5¾” rod x 88¾” stroke (20 yd)
  • Ejector: 7½” bore x 7″ rod x 119½” stroke (25 yd)
  • Slide: 4½” bore x 3½” rod x 32½” stroke
  • Sweep: 4″ bore x 3″ rod
  • Tailgate: 2⅞” bore x 2½” rod x 32½” stroke

Tailgate

  • Walls: 3/16″ AR200
  • Wear Strips: ½” x 3″ 1044 steel
  • Seal Height: 50 in.

Options & Painting

  • Options: Spool winch, reeving cylinder, container lift bar
  • Paint: Epoxy primer & PPG urethane topcoat
  • Controls: Mechanical w/ integrated panel

Key Features of McNeilus Standard Rear Loaders

  • Reliable Performance: Engineered to deliver consistent and dependable operation in demanding refuse collection environments.
  • Versatile Design: Adaptable for both residential and light commercial routes, making it suitable for a variety of collection needs.
  • Container Tipper Kick Bar: Facilitates efficient commercial pickups, enhancing productivity during operations.
  • Cart Tippers: Designed for easy and efficient collection from residential routes.
  • Reduced Maintenance Requirements: Fewer lubrication points on the tailgate and self-lubricating slide shoes lower maintenance needs and downtime.

Quick Connect

Want more information?

Our Standard Rear Loaders

McNeilus Standard Rear Loader Dimensions

Description

20 YD³ (15.3 m³)

25 YD³ (19.1 m³)

28 YD³ (21.4 m³)

32 YD³ (24.5 m³)

Overall Length, Tailgate Closed

246 in.
6248 mm

278 in.
7061 mm

297 in.
7544 mm

322 in.
8179 mm

Overall Length, Tailgate Raised

262 in.
6655 mm

294 in.
7468 mm

313 in.
7950 mm

338 in.
8585 mm

Overall Height, Tailgate Closed

99 in. / 2515 mm (all sizes)

Overall Height, Tailgate Raised

150 in. / 3810 mm (all sizes)

Inside Hopper Width

80 in. / 2032 mm (all sizes)

Hopper Opening Height

57 in. / 1448 mm (all sizes)

Overall Width w/ Steps

102 in. / 2591 mm (all sizes)

Overall Width w/o Steps

96 in. / 2438 mm (all sizes)