ZERO RADIUSTM AUTOMATED SIDE LOADER
ZERO RADIUS SIDE LOADER
Navigating daily collection routes can present numerous challenges, from narrow streets and alleyways to clearance issues around containers. Overcome these obstacles with the Zero Radius™ Automated Side Loader.
This state-of-the-art refuse truck features an innovative zero-radius operation, allowing the arm to reach rather than swing out, eliminating the need for wide clearances when collecting cans. With an optional 12-foot extended reach, it’s even easier to maneuver around cul-de-sacs and obstacles like parked cars. This field-proven arm is designed to tackle even the densest routes with ease.
Additional advancements include the CODE™ system, which utilizes simplified CAN-based controls to provide comprehensive vehicle diagnostics right at your fingertips. The system also features an integrated smart fuse panel, reduced hardware requirements, pre-trip reminders, status messages, and much more!
- Arm Out/In: 2.5 sec (6 ft only)
- Arm Up/Down: 3 sec
- Grabber Open/Close: 1.5 sec
- Pack Cycle: 16 sec ±10%
- Ejector Extend: 27 sec / Retract: 13 sec
- Top Door: 1.5 sec up/down
- Tailgate: 16 sec open / 18 sec close
- Style: Zero Radius (ZR)
- Construction: Tube Grade 500B
- Reach: 6 ft standard / 12 ft optional
- Lifting Capacity: 550 lb
- Capacity: 4.8 yd³ (top door down)
- Walls: 3/16″ AR450
- Floor: 1/4″ AR450
- Lower Face: 1/4″ AR200
- Follower Panel: 10-gauge Grade 50 steel
- Wear Strips: Chromium Carbide X-Wear
- Body Floor: 3/16″ AR200
- Walls: AR450 & AR200
- Tailgate Sides: 1/8″ AR200
- Tailgate Rear: 1/8″ AR500
- 7-Point Auto Locking
- PTO-mounted piston pump
- Electric/hydraulic proportional valves
- 50 gal reservoir
- 5 micron return filter
- 40 mesh suction strainer
- McNeilus CODE™ CAN-based controls
- Full eject body
- Grabber fits 30–110 gal cans
- Optional 12 ft reach
- Paint: PPG Urethane Topcoat
Key Features of The Zero Radius Side Loaders
- Innovative Zero Radius Operation: Arm design allows for reaching without swinging out, minimizing the need for wide clearances during collection.
- Optional 12-Foot Extended Reach: Enhances maneuverability around cul-de-sacs and obstacles, such as parked cars, for efficient route navigation.
- Field-Proven Arm Design: Engineered to handle some of the densest collection routes with reliability and ease.
- Integrated Smart Fuse Panel: Reduces hardware requirements and enhances reliability, contributing to overall efficiency.
- Pre-Trip Reminders and Status Messages: Built-in alerts help ensure the vehicle is ready for operation and provide real-time updates on system status.
Our Zero Radius Side Loaders
|
Description |
22 YD³ (16.8 m³) |
24 YD³ (18.4 m³) |
26 YD³ (19.9 m³) |
|---|---|---|---|
|
(A) Body Length: Tailgate Closed |
240 in. |
260 in. |
280 in. |
|
(B) Body Length: Tailgate Open |
307 in. |
307 in. |
347 in. |
|
(C) Height: Tailgate Closed — 101 in. / 2553 mm (all sizes) |
|||
|
(D) Height: Tailgate Open |
145 in. |
163 in. |
145 in. |
|
(E) Max Height When Dumping — 122 in. / 3099 mm (all sizes) |
|||
|
(F) Body Width: Arm Out, Grabber Closed — 206 in. (269 in. for 12 ft arm) |
|||
|
(G) Body Width: Arm In, Grabber Closed — 143 in. / 3620 mm (all sizes) |
|||
|
(H) Body Width: Arm In, Grabber Open — 115 in. / 2921 mm (all sizes) |
|||
|
(I) Grabber Height from Ground — 12 in. / 305 mm (based on 40″ frame rail) |
|||
|
Description |
27 YD³ (20.6 m³) |
28 YD³ (21.4 m³) |
31 YD³ (23.7 m³) |
|---|---|---|---|
|
(A) Body Length: Tailgate Closed |
294 in. |
300 in. |
314 in. |
|
(B) Body Length: Tailgate Open |
361 in. |
347 in. |
361 in. |
|
(C) Height: Tailgate Closed — 101 in. / 2553 mm (all sizes) |
|||
|
(D) Height: Tailgate Open |
145 in. |
163 in. |
163 in. |
|
(E) Max Height When Dumping — 122 in. / 3099 mm (all sizes) |
|||
|
(F) Body Width: Arm Out, Grabber Closed — 206 in. (269 in. for 12 ft arm) |
|||
|
(G) Body Width: Arm In, Grabber Closed — 143 in. / 3620 mm (all sizes) |
|||
|
(H) Body Width: Arm In, Grabber Open — 115 in. / 2921 mm (all sizes) |
|||
|
(I) Grabber Height from Ground — 12 in. / 305 mm (based on 40″ frame rail) |
|||
